Prodoct Informations

The VigorSwitch P1100 is ideal for SOHO and small business with the high-performance capability and IPv6 management. To cater for high bandwidth traffic, it is equipped with 8 Gigabit Ethernet ports for the LAN side, and 2 SFP ports for the backbone side. VigorSwitch P1100 is equipped with extensive facilities for maximizing your LAN performance, VLAN capability to allow flexible network design, and QoS capability for flexible bandwidth control. Furthermore, the power saving by IEEE802.3az EEE can offer you a green Ethernet networking environment.

• IPv6 and IPv4 conformity for the next generation network
• 8 x 10/100/1000 Base-T and 2 x 100/1000 SFP Port
• Port 1-8 support 802.3at PoE+, the maximum power budget :120Watt (Up to 30Watt per port)
• Supports SNMPv1/v2c for management
• Advanced QoS for application traffic prioritization
• VLAN features support both port-based and tag-based
• Power saving by 802.3az Energy Efficient Ethernet

IP Version

• IPv4
• IPv6

Standard Compliance

• IEEE 802.3 10Base-T
• IEEE 802.3u 100Base-T
• IEEE 802.3ab 1000Base-TX
• IEEE 802.3x Flow Control Capability
• ANSI/IEEE 802.3 Auto-negotiation
• IEEE 802.1q VLAN
• IEEE 802.1p Class of Service
• IEEE 802.1d Spanning Tree
• IEEE 802.1w Rapid Spanning Tree
• IEEE 802.3ad Port Trunk with LACP
• IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
• IEEE 802.1az Energy Efficient Ethernet

VLAN

• IEEE802.1Q Tag-based VLAN
• Support Port-based VLAN
• Support Static VLAN
• Port Isolation
• Management VLAN
• Voice VLAN (OUI Mode)

QoS

• Support 8 Queues
• Rate limit
  • Port-based (Ingress/Egress)
• Queue Setting
  • WRR
  • Strict Priority
• Class of Service
  • Port-based
  • CoS
  • DSCP
  • CoS-DSCP
  • IP Precedence

Link Aggregation

• Supports 8 Link Aggregation Groups with Static & LACP types
• Up to 8 Ports for Each Group
• Support Traffic Load Balancing

Management

• Support SNMP v1/v2c
• Firmware Upgrade/Backup via HTTP/TFTP
• Support HTTP/HTTPs Web User Interface
• Configuration Upgrade/Backup via HTTP/TFTP
• Factory Default
• System Reboot
• Support Command Line Interface (CLI) via Telnet

POE

• Dynamic (None Priority class Base)
• Static (Priority Base)

Security

• Supports Storm Control (Broadcast, Unknown Multicast, Unknown Unicast)
• DoS attack prevention

Account Management

• Multiple user Account
• Two-Level Security (Admin/User)

Network

• Up to 8K MAC Address Table
  • Dynamic Address
  • Static Address
• Support Jumbo Frame 10KBytes
• Support STP and RSTP
• Support SNTP