Prodoct Informations

The WAE-5023PA is a 5.15~5.825GHZ full range 23dBi wireless panel antenna constructed of heavy wind resistant material. Unlike other low quality antennas that will flex in the wind and cause frequent signal loss. The WAE-5023 PA provide rock solid stability that can withstand strong wind at up to 216Km/h. The directional (horizontal 9 degree, vertical 9 degree) characteristic allow the antenna to focus its signal for longer distance. It is very suitable for outdoor client-to-AP application or point-to-point bridge use. The antenna is equipped with female N-Type connector for use with outdoor cable.

Wireless signal loses a majority of its strength when penetrating a concrete wall. Therefore, indoor AP has difficulty to makes its signal available outside of the building. The WAE-5023PA allows your AP's antenna to extend outside, mounting on a rooftop or outside wall. Furthermore, patch antenna focus the antenna signal in a particular direction to allow secure signal transmission over longer distance. This is essential for outdoor point-to-pint bridge use. The antenna comes with N-Type connector to connect with outdoor AP. To connect with indoor AP's reversed-SMA connector, a RG316-SNF adapter cable and RG213-SNN cable is required

Connector type	Female N-Type
Recommended adapter and cable	RG-213-SNN cable required for connection with outdoor AP RG316-SNM cable required for short connection(30cm) with indoor AP RG316-SNF and SG213-SNN required for longer distance(>30cm) with indoor AP
Frequency range	5.25~5.875GHz
Impedance	50 Ohms nominal
VSWR	2.0:1 Max
Gain	23 dBi
Radiation	directional 9 degree horizontal, 9 degree vertical
Survival Wind speed	216 km/hr
Radome Material	PC, UV Resistant
Polarization	Linear
Temperature	Operating: -40 to +80 ℃
Lighting Protection	DC Ground
Product Weight (g)	1200 g
Product Size ( L x W x H (mm) )	320 x 320 x 18 mm