AC080_AC260 URL Multi-line deversion rules
Subject |
Xentino AC080_AC260_URL_Multi-line deversion rules |
Device |
Xentino AC260_AC08 |
Date |
17.08.2023 |
Software Version |
V3.11 |
Hardware Version |
1 |
Description |
Xentino AC080_AC260_URL_Multi-line deversion rules |
This is The topology for Routing URL in multi line deversion in this case we have Three Wan network Connected To Xentino AC260 Device An One lan Network Using from This Load Balancing and Failover Issue . in This Case We have Special Url should be Using Special Wan Address on simple Talk
www.simet.com.Tr going From Wan 2 and www.Xentino.com going From wan1 , This Project is For some Security issues like Bank sor any special Url recognize and checking you source ip address and you didnt want every time going with new or random source ip Becuse Of That We using This senario.
In The AC260 device We need to create custom Applications From the Object Management
And Click To add new one,This Object is for Our Url we should be put on Application for Web page and Connect our Url to Application
- Write a random name
- Choose App type as Webpage
- Writing a Custom description
- After That we should define our Domain by app on top of the screen and Add new
- Define Your Domain in this case is we should be create for www.simet.com.tr and www.xentino.com as you can see , when you add this object we should be go for adding some policy about our url and wan connections
First of all we should be Do Failover and load balance Between our Wan’s Wich wan as First Conection and Wich on as second fail over and also Theird failover
- On Source Adress Choosing Address
- And In Shunt mode Choosing Source IP shunt
- And in this Case Our Priority Is like This Wan1 as First Connection Wan2 As Second Connection And Wan3 As Third Connection Attention If value Number Front of The line Get Higher Priority Get high
- After that we add a Policy for www.simet.com.tr in this Case we Want this web site always going From Wan2 so …
- On Source Address Choosing Address
- Application Type should Be Custome And On Webpage Find Your application adding before in this case We have simet
- After That Choosing Wan Priority for Us in this Case Wan2 is Our Target
- Attention the place of policy is important in this case failover policy Should be on the Third Postion and Simet policy on First Policy and Xentino on Second Place
And You Can Check is Working or not From Tracert command on CMD