Xentino SFP10 1GBase-LX Single Mode SFP Transceiver

Username :

Password :

Become a Member | Lost Password

Xentino

The transceiver is small form factor pluggable module with standard duplex connector for fiber communications. This module is designed for single-mode-fiber (SMF) and operates at a nominal wavelength of 1310 nm with cost effective and high performance. It is with the SFP 20-pin connector to allow hot plug capability.

Descriptions
Features
Documents
Alternatives
Related Items
Images

Single + 3.3V power supply
Differential Inputs and Outputs
Small Form Factor Pluggable MSA Compliant.
Commercial Operation Temp.: 0 ^oC to +70 ^oC
Industrial Operation Temp.: -40 ^oC to +85 ^oC
RoHS Compliant
Class 1 Laser International Safety Standard IEC 825 Compliant. Complies with EN60825-1 and FDA 21 CFR 1040.10 and 1040.11
Compliant with SFF-8472 MSA Digital Diagnostic Monitor (DDM), Internal Calibration.

Absolute Maximum Ratings
Parameter			Symbol	Min	Typ	Max	Unit
Supply Voltage			VCC	0	-	4	V
Storage Temperature			TS	-40	-	85	^oC
Operating Temperature		Commercial	TOP-com	0	-	70	^oC
Operating Temperature		Industrial	TOP-ind	-40	-	85	^oC
Lead Soldering Limits			TSOLD	-	-	260/10	^oC /sec
General Specifications
Parameter			Symbol	Min	Typ	Max	Unit
Data Rate			B	0.80	1.25	1.50	Gbps
Supported Link Length on 9/125m SMF		for 1312-10	L	10	-	-	Km
		for 1312-15		15	-	-	Km
		for 1312-20		20	-	-	Km
Supply Current			ITx+IRx	-	-	300	mA
Power Dissipation			PDis	-	-	1000	mW
Transmitter Electrical Characteristics
Parameter			Symbol	Min	Typ	Max	Unit
Supply Voltage			VCC	3.15	3.3	3.45	V
Data Differential Input Voltage			Vin, pp	400	-	2000	mV
Disable Input Voltage			VIL - VCC	-1.81	-	-1.48	V
Enable Input Voltage			VIH - VCC	-1.16	-	-0.88	V
TX Fault Voltage-High (Fault)			VTF	2.0	-	VCC	V
TX Fault Voltage-Low (Normal)			VTN	0	-	0.8	V
POut@TX Disable Asserted			POFF	-	-	-45	dBm
Transmitter Optical Characteristics
Parameter			Symbol	Min	Typ	Max	Unit
Output Optical Power on 9m SMF			PO	-9	-	-3	dBm
Center Wavelength			C	1280	1310	1340	nm
Spectral Width (RMS)			RMS	-	-	2	nm
Optical Rise Time (20%-80%)			tr	-	-	0.26	ns
Optical Fall Time (20%-80%)			tf	-	-	0.26	ns
Extinction Ratio			ER	9	-	-	dB
Receiver Electrical Characteristics
Parameter			Symbol	Min	Typ	Max	Unit
Supply Voltage			VCC	3.15	3.3	3.45	V
Data Differential Output Voltage			Vout, pp	500	-	1200	mV
Receiver LOS/SD Output Voltage-High			VRH	2.0	-	VCC	V
Receiver LOS/SD Output Voltage-Low			VRL	0	-	0.8	V
Data Output Rise Time (20%-80%)			tr	-	-	0.35	ns
Data Output Fall Time (20%-80%)			tf	-	-	0.35	ns
Receiver Optical Characteristics
Parameter			Symbol	Min	Typ	Max	Unit
Maximum Receiver Power			Pin	-3	-	-	dBm
Receiver Sensitivity	for 1312-10		PS	-	-	-21	dBm
Receiver Sensitivity	for 1312-15/20		PS	-	-	-23	dBm
Operating Wavelength			C	1100	-	1600	nm
Optical Return Loss			PR	-	-	12	dB
Signal Detect-Asserted	for 1312-10		PA	-	-	-21	dBm avg.
Signal Detect-Asserted	for 1312-15/20		PA	-	-	-23	dBm avg.
Signal Detect-Deasserted			PD	-36	-	-	dBm avg.
Signal Detect-Hysteresis			PA-PD	0.5	-	-	dB