Prodoct Informations

The VigorAP 902 is the business-grade Gigabit Wi-Fi Access Point. You can establish a stable and extendable wireless network. The dual band (2.4G/11ac) allows essential applications to operate in the less interference environment. The MIMO technology offers the advance wireless network standard for the coverage, backward compatible with 802.11b/g/n. The Power over Ethernet (PoE) by LAN A3 port eases the installation no matter where the power plug is. The robust management and simple configuration deliver reliable and secure wireless local area networks (WLANs). On the other hand, the VigorAP 902 with 5 Gigabit LAN ports enhances the data transmission for wired connected devices as well.

• Concurrent Dual Band 802.11n AP
• IEEE802.11ac compliant (2x2, 867Mbps)
• 802.3af Power over Ethernet (PoE-PD)
• Wi-Fi multimedia (WMM) quality of service features
• Comprehensive and trusted security
• 4 SSIDs for each band (2.4G/5G)
• Support 5 Gigabit LAN ports
• Embedded USB printer server and support USB thermometer
• 2 VLAN groups managing both wired (Ports) & wireless clients (SSIDs)
• Multiple operation modes for 2.4G Wireless
• TR-069 for LAN-A and LAN-B
• Unified devices management portal offer single-panel view across AP Management

1. Wireless AP

• IEEE802.11a/b/g/n Compliant
• Mode:
  • 802.11b/g/n 2.4G Band:

• AP Mode
• AP Bridge Point to Point
• AP Bridge Point to Multipoint
• AP Bridge WDS (Wireless Distribution System)
• Universal Repeater

• 802.11a/n 5G Band:

• AP Mode
• Universal Repeater*

• Wireless Client List
• 64/128-bit WEP/WPA/WPA2
• Multiple/Hidden SSID
• WPS
• WMM
• MAC Address Control
• Wireless Isolation
• Internal Radius Server
• MAC Clone
• 802.1x Authentication

• Internal RADIUS Server Support PEAP
• RADIUS Proxy Support TLS & PEAP

• DHCP Server & Client
• VLAN Grouping and SSID Mapping for LAN A & B
• Management VLAN for LAN A & B
• Limited Wireless Clients (Up to 64 Clients per band)

2. USB

• Printer Server
• Support temperature sensor

3. Network Management 

• Web-based User Interface (HTTP/HTTPS)
• CLI (Command Line Interface, Telnet)
• Configuration Backup/Restore
• Firmware Upgrade via HTTP/TR-069
• Syslog/Mail Alert
• DHCP Server & Client
• TR069 (Compliant with VigorACS SI)
• AP Management (with Vigor Series Routers)

4. Hardware Interface

• 5 x 10/100/1000M Base-T LAN Switch, RJ-45 (LAN A3 for PoE Indoor Use)
• 1 x USB 2.0 Host with current limit 170mA
• 2 x SMA Detached Antennas
• 1 x Factory Reset Button
• 1 x Wireless ON / OFF / WPS Button
• 1 x Power ON / OFF Button